Common industry standard brush
1. The diameter of the brush body and the diameter of the hole
2, the tensile strength of abrasive wire
3, brush roller brush wire density
4, normal service life
5, abrasive and roughness
6, whether the brush off hair
7, water absorption roller surface finish, flexibility and water absorption
8, brush, brush body materials used
Note: the same type brush or brush roller, different from the general use of its products in different specifications, such as some deburring, and some can be cleaned and polished copper foil, some can be used for polishing of solder.
Use matters needing attention
1, the general water spraying work, the temperature tolerance is not greater than 60 degrees Celsius
2, brush installed according to the wire brush slightly oblique clockwise operation
3, abrasive particle size, brush pressure, conveying speed, etc.
4, brush roller to be installed firmly
5, water absorption roller should not need to conserve water, do not press, so as to avoid deformation